Relay Controller

Important Safety Information for the Relay Controller
Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry soft...
Tue, 9 Feb, 2016 at 12:31 PM
Relay Controller Overview
Thank you for purchasing the Relay Controller. Combining advanced infrared and ZigBee technologies, the Relay Controller is a 12/24V AC/DC powered device th...
Tue, 9 Feb, 2016 at 12:54 PM
Hook up diagram for the Relay Controller
Tue, 9 Feb, 2016 at 12:49 PM
Mounting the Relay Controller
Remove the base of the Relay Controller from the main unit. Using the provided dry anchors and screws, mount the base of the Relay Controller to the wall. ...
Tue, 9 Feb, 2016 at 1:02 PM
Connecting the Relay Controller to a ZigBee network
Follow the instructions below.  Connecting to the Jetlun Energy Manager or Jetlun eBox locally Follow the instructions that came with your Energy Ma...
Tue, 9 Feb, 2016 at 1:07 PM
Customizing the eight relays on the Relay Controller
MyJetlun allows you to customizing the name of each individual relays on the Relay Controller. To do so, follow these simple steps.   Log into your...
Tue, 9 Feb, 2016 at 1:08 PM
How to leave an existing ZigBee network on the Relay Controller?
To leave an existing ZigBee network, press and hold the network button for 8-10 seconds. The LED will revert to blinking orange to indicate that it has left...
Tue, 9 Feb, 2016 at 1:09 PM
Restoring the Relay Controller to its Factory Default Settings
Press and hold the LED button for 30 seconds. The LED will flash green quickly for 30 seconds to indicate that it is restoring to its factory defa...
Tue, 9 Feb, 2016 at 1:10 PM
Technical Specification for the Relay Controller
General Standard Compliance IEEE 802.15.4 Home Automation 1.0 Interface 12- screw terminals connects (2 for input power, 2 for Common, 8 for 2A 30...
Tue, 9 Feb, 2016 at 1:11 PM
Legal and Regulatory Information for the Relay Controller
Important Note of Modifications   Intentional or unintentional changes or modifications to the equipment must not be made unless under the express conse...
Tue, 9 Feb, 2016 at 1:12 PM