Reed Switch

Important Safety Information for the Reed Switch
Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry soft...
Mon, 8 Feb, 2016 at 4:04 PM
Reed Switch Overview
Thank you for purchasing the Reed Switch from Jetlun. The Jetlun Reed Switch is a ZigBee-enabled open/close sensor. Powered by either 12/24V AC/DC, the Reed...
Mon, 8 Feb, 2016 at 4:14 PM
Hook up diagram for the Reed Switch
Mon, 8 Feb, 2016 at 4:16 PM
Mounting the Reed Switch
The Reed Switch can either be wall mounted or be din railed mounted using the included din rail bracket inside an external enclosure (sold separately).   ...
Mon, 8 Feb, 2016 at 4:17 PM
How to connect the Reed Switch to a ZigBee network?
Follow the instructions below.  Connecting to the Jetlun Energy Manager or Jetlun eBox locally Follow the instructions that came with your Energy Ma...
Mon, 8 Feb, 2016 at 4:18 PM
How to leave an existing ZigBee network on the Reed Switch?
To leave an existing ZigBee network, press and hold the factory reset button for 8 seconds. The ZigBee LED will begin flashing orange to indicate it has lef...
Mon, 8 Feb, 2016 at 4:19 PM
Technical Specification for the Reed Switch
General Standard Compliance IEEE 802.15.4 Home Automation 1.0 Interface 4 spring type terminal connectors 1x Input 12/24V AC/DC 2x Output 1...
Mon, 8 Feb, 2016 at 4:20 PM
Legal and Regulatory Information for the Reed Switch
Important Note of Modifications   Intentional or unintentional changes or modifications to the equipment must not be made unless under the express conse...
Mon, 8 Feb, 2016 at 4:21 PM
Copyright
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or...
Mon, 8 Feb, 2016 at 4:21 PM