ZB Relay Module

Important Safety Information on the Relay Module
CAUTION: These installation instructions are for use by a licensed electrician only. To avoid electrical shock, do not perform any servicing other than what...
Sun, 7 Feb, 2016 at 11:37 PM
Relay Module Overview
Thank you for purchasing the ZB Relay Module from Jetlun. The ZB Relay Module is a general purpose 15A (10A for Australia) ZigBee-enabled hardwire 120-240VA...
Wed, 10 Feb, 2016 at 2:09 PM
Hook up diagram for the Relay Module
Sun, 7 Feb, 2016 at 11:27 PM
How to connect the ZB Relay Module to a ZigBee Network?
Follow the instructions below.  Connecting to the Jetlun Energy Manager or Jetlun eBox locally Follow the instructions that came with your Energy Ma...
Sun, 7 Feb, 2016 at 11:29 PM
Leaving an existing ZigBee network on the Relay Module?
IMPORTANT: There is no reset button on the Relay Module. The only way to leave an existing ZigBee network is to force it to leave through the Jetlun Energy ...
Sun, 7 Feb, 2016 at 11:33 PM
Technical Specification for the Relay Module
General Standard Compliance IEEE 802.15.4 Smart Energy 1.1/ Home Automation 1.0 Interface 8- quick connects (2 for input power and loading output,...
Sun, 7 Feb, 2016 at 11:33 PM
Legal and Regulatory Information for the Relay Module
Important Note of Modifications   Intentional or unintentional changes or modifications to the equipment must not be made unless under the express conse...
Sun, 7 Feb, 2016 at 11:34 PM
Copyright
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or...
Sun, 7 Feb, 2016 at 11:34 PM