ZB IR Sensor

Important Safety Information for the IR Sensor
Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry soft ...
Sun, 7 Feb, 2016 at 9:14 PM
IR Sensor Overview
Thank you for purchasing the ZB Infrared (IR) Sensor. Combining advanced infrared and ZigBee technologies, the ZB IR Sensor can be programmed to replac...
Sun, 7 Feb, 2016 at 9:22 PM
Preparation before installing the IR Sensor
The ZB Infrared Sensor can be connected directly to an Energy Manager (RD75606) from Jetlun (sold separately).   Before trying to join to the Energy M...
Sun, 7 Feb, 2016 at 9:23 PM
Programming the IR Sensor
Toggle dip switch #1 to the ON position. As an example, to program turning the AC to its OFF setting, first using the remote control of the AC unit an...
Thu, 25 Feb, 2016 at 10:35 AM
Connecting the IR Sensor to a ZigBee Network
Follow the instructions below.  Connecting to the Jetlun Energy Manager or Jetlun eBox locally Follow the instructions that came with your Energy Ma...
Sun, 7 Feb, 2016 at 9:26 PM
Leaving an existing ZigBee network on the IR Sensor
To leave an existing ZigBee network, press and hold the factory reset button for 8 seconds. The ZigBee LED will begin flashing orange to indicate it has lef...
Sun, 7 Feb, 2016 at 9:27 PM
Technical Specification for the IR Sensor
General Standard Compliance IEEE 802.15.4 ZigBee Home Automation 1.0 Interface 1- Network Join button 1 - Programmable Dip Switch 1- Reed Swi...
Sun, 7 Feb, 2016 at 9:28 PM
Legal and Regulatory Information for the IR Sensor
Important Note of Modifications   Intentional or unintentional changes or modifications to the equipment must not be made unless under the express conse...
Sun, 7 Feb, 2016 at 9:28 PM
Copyright Information
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or...
Sun, 7 Feb, 2016 at 9:29 PM