Circuit Meter

Important Safety Information for the Circuit Meter
IMPORTANT: These installation instructions are for use by a licensed electrician only. To avoid electrical shock, do not perform any servicing other than wh...
Sun, 7 Feb, 2016 at 4:16 PM
Circuit Meter Overview
Thank you for purchasing the Circuit Meter from Jetlun. The ZB Circuit Meter is a single-phase CT-clamp metering solution. The Circuit Meter provides a disa...
Sun, 7 Feb, 2016 at 5:22 PM
Hook up diagram for the Circuit Meter
Sun, 7 Feb, 2016 at 5:14 PM
Mounting the Circuit Meter
Mount the Circuit Meter according to the following instructions: Protect the Circuit Meter from moisture, direct sunlight, high temperatures, and con...
Sun, 7 Feb, 2016 at 5:33 PM
Connecting CTs to the Circuit Meter
CAUTION: Always remove power before disconnecting any live wires. NOTE: Only use the CTs provided by Jetlun, as they have been specially calibrated to...
Sun, 7 Feb, 2016 at 5:35 PM
How to connect the ZB Circuit Meter to a ZigBee Network?
Follow the instructions below.  Connecting to the Jetlun Energy Manager or Jetlun eBox locally Follow the instructions that came with your Energy...
Sun, 7 Feb, 2016 at 11:29 PM
Leaving an existing ZigBee network on the Circuit Meter?
To leave an existing ZigBee network, press and hold the factory reset button for 8 seconds. The ZigBee LED will begin flashing orange to indicate it has lef...
Sun, 7 Feb, 2016 at 5:41 PM
Restoring the ZB Circuit Meter to Factory Default Settings
Below are instructions that explains how to restore the Circuit Meter to its factory default settings. Press and hold the Reset button for 30 sec...
Sun, 7 Feb, 2016 at 5:42 PM
ZB Circuit Meter Technical Specifications
General Standard Compliance IEEE 802.15.4 Smart Energy 1.x/ Home Automation 1.x Profile Interface 16- Jetlun CT Module connectors 1- DC 7 ...
Sun, 7 Feb, 2016 at 5:46 PM
Legal Notice and Regulatory Information for the Circuit Meter
Important Note of Modifications   Intentional or unintentional changes or modifications to the equipment must not be made unless under the express conse...
Sun, 7 Feb, 2016 at 5:47 PM