ZB In-Home Display

Important Safety Information for the In-Home Display
Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry ...
Mon, 8 Feb, 2016 at 8:30 PM
In-Home Display Overview
Thank you for choosing the In-Home Display (RD77723) from Jetlun. The In-Home Display is a ZigBee-enabled 3.5” color touch screen backlit display that gives...
Tue, 9 Feb, 2016 at 11:53 AM
How to connect the In-Home Display to a ZigBee network?
Connecting to the Smart Meter Please contact your local utility to see if they support this feature and allow devices to connect to their Smart Mete...
Tue, 9 Feb, 2016 at 11:53 AM
How to leave an existing ZigBee network?
To leave an existing ZigBee network: Go to Settings. Select Network. Under Network Type, ensure ZigBee is selected. Click on the Lea...
Tue, 9 Feb, 2016 at 11:56 AM
Configuring preferences on the In-Home Display
The Settings > Performance section allow you to configure the Language, Temperature Measurement, Currency and Unit of Measurement for the In-Home Display...
Tue, 9 Feb, 2016 at 11:57 AM
How to adjust brightness on the In-Home Display?
Screen brightness affects battery life and the overall power consumption of the In-Home Display. Dim the screen to extend the time of the battery or reduce ...
Tue, 9 Feb, 2016 at 11:58 AM
How to upgrade firmware on the In-Home Display?
The In-Home Display can be upgraded remotely by the utility or by Jetlun through the myJetlun portal. However, you can also upgrade the firmwave of the In-H...
Tue, 9 Feb, 2016 at 12:03 PM
How to input energy tariff on the In-Home Display?
The In-Home Display allows you to manually enter Tariff information directly onto the device. You can chose from Time-of-Use pricing or Tier pricing. To ent...
Tue, 9 Feb, 2016 at 12:04 PM
Restoring to Factory Default Settings on the In-Home Display
You can reset the In-Home Display to erase all data on the device and restore to its original factory default settings.  NOTE: Restoring to Factory De...
Tue, 9 Feb, 2016 at 12:05 PM
Technical Specifications for the In-Home Display
General Standard Compliance  IEEE 802.15.4 Smart Energy 1.1 Interface 1- USB 2.0 port 1- DC power port 1- Factory Reset button Memory 6...
Tue, 9 Feb, 2016 at 12:06 PM