ZB Occupancy Sensor

Important Safety Information for the ZB Occupancy Sensor
Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry soft ...
Sun, 7 Feb, 2016 at 7:45 PM
ZB Occupancy Sensor Overview
Thank you for purchasing the ZB Occupancy Sensor. The ZB Occupancy Sensor is a Zigbee-enabled passive infrared (PIR) occupancy sensor capable of detecting i...
Sun, 7 Feb, 2016 at 8:15 PM
Mounting the Occupancy Sensor
Secure the provided wall bracket onto the wall with the provided screws. Insert the product into the wall bracket slot. Adjust the Occupancy Sens...
Sun, 7 Feb, 2016 at 8:30 PM
Connecting the Occupancy Sensor to a ZigBee network
Follow the instructions below.  Connecting to the Jetlun Energy Manager or Jetlun eBox locally Follow the instructions that came with your Ener...
Sun, 7 Feb, 2016 at 8:23 PM
Leaving an existing ZigBee network on the Occupancy Sensor
To leave an existing ZigBee network, press and hold the factory reset button for 8 seconds. The ZigBee LED will begin flashing orange to indicate it has lef...
Sun, 7 Feb, 2016 at 8:24 PM
Technical Specification for the Occupancy Sensor
General Standard Compliance IEEE 802.15.4 ZigBee Home Automation 1.0   Interface 1- Network Join button 1- DC power LEDs Power, IR, ZigBe...
Sun, 7 Feb, 2016 at 8:25 PM
Legal and Regulatory Information for the Occupancy Sensor
Important Note of Modifications   Intentional or unintentional changes or modifications to the equipment must not be made unless under the express ...
Sun, 7 Feb, 2016 at 8:34 PM
Copyright Information
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or...
Sun, 7 Feb, 2016 at 8:34 PM