ZB Temperature and Humidity Sensor

Important Safety Information for the Temperature and Humidity Sensor
Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry soft...
Sun, 7 Feb, 2016 at 5:55 PM
Temperature and Humidity Sensor Overview
Thank you for purchasing the ZB Temperature and Humidity Sensor from Jetlun. It is a ZigBee-based battery powered Temperature and Humidity Sensor for indoor...
Sun, 7 Feb, 2016 at 6:04 PM
Connecting the Temperature and Humidity Sensor to a ZigBee Network
Follow the instructions below.  Connecting to the Jetlun Energy Manager or Jetlun eBox locally Follow the instructions that came with your Energy...
Sun, 7 Feb, 2016 at 8:23 PM
Leaving an Existing ZigBee Network on the ZB Temperature and Humidity Sensor
To leave an existing ZigBee network, press and hold the factory reset button for 8 seconds. The ZigBee LED will begin flashing orange to indicate it has lef...
Sun, 7 Feb, 2016 at 6:11 PM
Technical Specification for the ZB Temperature and Humidity Sensor
General Standard Compliance IEEE 802.15.4 ZigBee Home Automation 1.0   Interface 1- Network Join button LEDs Battery, ZigBee ZigBee Data ...
Sun, 7 Feb, 2016 at 6:12 PM
Legal and Regulatory Information for the ZB Temperature and Humidity Sensor
Important Note of Modifications   Intentional or unintentional changes or modifications to the equipment must not be made unless under the express conse...
Sun, 7 Feb, 2016 at 6:13 PM
Copyright Information
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or...
Sun, 7 Feb, 2016 at 6:13 PM