ZB Extender

Important Safety Information for the ZB Extender
Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry soft...
Thu, 4 Feb, 2016 at 10:28 PM
ZB Extender Overview
Thank you for choosing the ZB Extender. The ZB Extender is a ZigBee wireless repeater. ZB Extender Features ZigBee RF mesh networking ...
Sun, 7 Feb, 2016 at 3:22 PM
How to connect the ZB Extender to a ZigBee Network?
Follow the instructions below. Or, consult the ZB Extender Quick-Start Guide at the bottom of this article. Connecting to the Smart Meter Please ...
Sun, 7 Feb, 2016 at 3:14 PM
Leaving an existing ZigBee Network on the ZB Extender
To leave an existing ZigBee network, press and hold the factory reset button for 8 seconds. The Power/ ZigBee LED will begin flashing orange to indicate it ...
Thu, 4 Feb, 2016 at 10:30 PM
Restoring to Factory Default Settings on the ZB Extender
Press and hold the Reset button for 30 seconds. The Power/ZigBee LED will flash green quickly to indicate that it is restoring to its factory default sett...
Thu, 4 Feb, 2016 at 10:25 PM
ZB Extender Technical Specification
General Standard Compliance IEEE 802.15.4 Smart Energy 1.1 or Home Automation Profile Interface 1- AC socket 1- Factory Reset Butotn...
Sun, 7 Feb, 2016 at 2:26 PM
Legal Notice and Regulatory Information for the ZB Extender
Important Note of Modifications   Intentional or unintentional changes or modifications to the equipment must not be made unless under the express con...
Sun, 7 Feb, 2016 at 3:31 PM
Copyright Information
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or...
Thu, 4 Feb, 2016 at 10:23 PM