Thank you for choosing the Appliance Module Plus. The Appliance Module Plus is a two 30A relay Load Control Switch (LCS) that also monitors the energy usage of the appliance that is plugged in.
Appliance Module Plus Features:
• ZigBee RF mesh networking
• Remote ON/OFF
• Demand Response (DR) LED indicator
• One-time DR Opt-Out/ Opt-In button
• Measuring energy usage of the appliance plugged in with a resolution of 1 watts
Physical Description
7.8x5.7x3.2" (198x144x81mm)

LED Indicators

Power/ ZigBee |
- Solid Green for 15 seconds indicates there is power to the device
- Fast Blinking Green indicates it is restoring to its factory default settings
- Slow Blinking Green indicates it successful join to a network but time is unsychronized
- Solid Green indicates joining success to a network
- Blinking Orange indicates it is searching for a available network to join
|
Demand Response Event |
- Off indicates no event in process or scheduled
- Solid green indicates scheduled event and no event in process
- Slow blinking green indicates event in process and no scheduled event
- Fast blinking green indicates event in process and there is another scheduled event
|
Demand Response Level |
- Off indicates there is no event in process
- Solid green indicates Demand Response Level#1
- Slow blinking green indicates Demand Response Level#2
- Fast blinking green indicates Demand Response Level#3
- Solid orange indicates Demand Response Level#4
- Slow blinking orange indicates Demand Response Level#5
- Fast blinking orange indicates Demand Response Level#6
- Solid red indicates Demand Response Level#7
- Slow blinking red indicates Demand Response Level#8
- Fast blinking red indicates Demand Response Level#9
|
Factory Reset |
Factory Default and Leave ZigBee Network button
|
Relay |
Solid Green indicates Relay is Closed |
Package Contents