WARNING: These installation instructions are for use by a licensed electrician only. To avoid electrical shock, do not perform any servicing other than what is contained in this User Guide unless you are a licensed electrician and qualified to do so.

 

CAUTION: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.


  1. Read these instructions.
  2. Heed all warnings.
  3. Follow all instructions.
  4. Do not use this apparatus near water.
  5. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Jetlun Products.
  6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
  7. Only use attachments/accessories specified by the manufacturer.
  8. Unplug this apparatus during lightning storms or when unused for long periods of time.
  9. Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.
  10. Jetlun recommends that a licensed electrician install the Appliance Module Plus.
  11. The Appliance Module Plus can be installed outside of an electrical enclosure but requires proper conduit directly to the device.
  12. Before turning on power to the Panel Meter, ensure that all the wires are securely installed by tugging on each wire.
  13. Equipment must be disconnected from the HAZARDOUS LIVE voltage before access.
  14. Do not install the Appliance Module Plus where it may be exposed to temperatures outside of the product specification.
  15. Do not install the Appliance Module Plus where it may be exposed to excessive moisture, dust, salt spray, or other contamination.
  16. Do not drill mounting holes using the Appliance Module Plus as a guide; the drill chuck can damage the Appliance Module Plus housing or screw terminals.
  17. If the Appliance Module Plus is installed incorrectly, the safety protections may be impaired.
  18. All cables shall be in flexible conduit with appropriate fittings on each end of the conduit. All cables must be installed in a manner that maintains the Appliance Module Plus watertight integrity.

 

NOTE: The use of of Jetlun Appliance Module Plus in conjunction with an appliance may cause a loss of ignition in gas hot water tanks, damage to HVAC systems, and other appliances. The use of these devices may also shorten the useful life of the appliance.