The Energy Manager (RD75606) has a built-in web server that can be accessed and managed without being connected to the myJetlun portal or any network.

 

  1. Using the Ethernet cable that came with your Energy Manager, connect it to one of the four other available ports on the back of the Energy Manager and connect the other end of the Ethernet cable to your Router.
  2. Connect the Energy Manager Universal Power Supply to the Power port on the back of the Gateway and plug into a nearby power outlet directly.  
  3. Ensure the Power LED is lit solid green and the Internet LED is solid green.
  4. Locate the Energy Manager local IP address assigned from your Router.
  5. Connect your PC or laptop to your Local Area Network (LAN).
  6. Launch a web browser and enter the following Energy Manager's IP address assigned by your Router, in the Address field. Then, press Enter.
  7. You will land on the Energy Manager's local web utility.


NOTE: Plug the Energy Manager (RD75606) directly into an electrical outlet. Do not plug the Energy Manager into a UPS, power strip, or other similar device with surge protection.