The Energy Manager (RD75606) has a built-in web server that can be accessed and managed without being connected to the myJetlun portal or any network.

  1. Turn off your PC or laptop.
  2. Using the Ethernet cable that came with your Energy Manager, connect your PC or laptop to one of the four other available ports on the back of the Energy Manager and connect the other end of the Ethernet cable to your PC or laptop.
  3. Connect the Energy Manager Universal Power Supply to the Power port on the back of the Gateway and plug into a nearby power outlet directly. 
  4. Ensure the Power LED is lit solid green.
  5. Now, you can turn on your computer. 
  6. Set a static IP address on your computer to 192.168.1.X where X is any number below 230. 
  7. Launch a web browser and enter the following Energy Manager's default IP address 192.168.1.230, in the Address field. Then, press Enter.
  8. You will land on the Energy Manager's local web utility.


NOTE: Plug the Energy Manager (RD75606) directly into an electrical outlet. Do not plug the Energy Manager into a UPS, power strip, or other similar device with surge protection.