Mount the Circuit Meter according to the following instructions:


Protect the Circuit Meter from moisture, direct sunlight, high temperatures, and conductive pollution (salt spray, metal dust, etc.). If moisture or conductive pollution may be present, use an IP 66 or NEMA 4 rated enclosure to protect the Circuit Meter. Due to the exposed screw terminals, the Circuit Meter must be installed in either an electrical service panel, a junction box, or an electrical room. The Circuit Meter may be installed in any orientation on a din rail (sold separately) using the din rail bracket provided.


Fasten the din rail bracket to the back of the Circuit Meter with the provided screws.


Clip the Circuit Meter onto a din rail.