Before you begin using myJetlun, it is best to have all the JIM devices in front of you to organize your setup. 


You should have the Energy Manager/ eBox MAC Address and Serial Number handy, as well as the MAC Address, EUI and Install Code of the other devices you plan to connect to the Energy Manager/ eBox. 


The MAC Address, Serial Number, EUI and Install Code can all be found printed on the product label adhere to the back or bottom of each product. For your convenience, you can use the template below to help you organize the information required for the setup of the myJetlun portal. 

 

 

Energy Manager/ EBox

 

- MAC Address:

 

 

- Serial Number:

 

 

Panel Meter

- MAC Address/ EUI:

- Install Code (if available):

 

- Phase A:

              Amp

 

- Phase B:

              Amp

 

- Phase C:

              Amp

 

Circuit Meter

- MAC Address/ EUI:

- Install Code (if available):

 

 

- port 1:

(e.g. Dishwasher, 20A, single-pole)

 

- port 2:

 

 

- port 3:

 

 

- port 4:

 

 

- port 5:

 

 

- port 6:

 

 

- port 7:

 

 

- port 8:

 

 

- port 9:

 

 

- port 10:

 

 

- port 11:

 

 

- port 12:

 

 

- port 13:

 

 

- port 14 :

 

 

- port 15:

 

 

- port 16:

 

 

Appliance Module

 

- MAC Address/ EUI:

- Install Code (if available):

 

 

Occupancy Sensor

 

- MAC Address/ EUI:

- Install Code (if available):

 

 

 

Please feel free to make your own table, if needed.

 

 

The myJetlun portal is best viewed with the following web browsers:

Chrome Version 12 and above

Safari Version 5.05 and above